(LR) – Light Rigid

TLILIC2014 - Licence to drive a light rigid vehicle

This unit involves the skills and knowledge required to obtain a licence to drive a light rigid vehicle. It includes systematically and efficiently controlling all vehicle functions, monitoring traffic and road conditions, managing vehicle condition and performance, and effectively managing hazardous situations.

Types of light rigid vehicles include:

- A rigid truck above 4.5 tonnes GVM but less than or equal to 8 tonnes GVM or

- A rigid bus with less than or equal to 8 tonnes GVM or seats more than 12 adults, including the driver.
Assessment of this unit will be undertaken within a licensing examination conducted by, or under the authority of, the relevant state/territory driver licensing authority. This unit applies to driving that is carried out in accordance with relevant state/territory driver licensing authority licence requirements and regulations for light rigid vehicles. Driving is performed with limited or minimum supervision, and with limited accountability and responsibility for self and others in achieving the prescribed outcomes.
Driving involves the application of routine vehicle driving principles and procedures to maintain safety and to operate a light rigid vehicle across a variety of driving contexts.

The primary legislative requirements applicable to this unit of competency are state/territory legislation in relation to road use and driver licensing. This unit addresses the knowledge and skills necessary for the granting of a Light Rigid Driver Licence. Being awarded this unit of competency is a necessary requirement to obtain a Light Rigid Driver Licence but is only one of several criteria. Prospective licence applicants should check with the state/territory driver licensing authority for other criteria (such as licence tenure and medical fitness) to confirm other eligibility requirements before undertaking training and/or assessment.

Course Information
The training and assessment for the TLILIC2014 Licence to drive a light rigid vehicle is conducted by Intrain Safety & Hire in conjunction with Further Education training & Assessment (FETA) RTO No. 40543

RMS Requirements

- Participants must hold a current C class licence and have held that licence for a minimum of twelve months.

- Be proficient in the use of a manual transmission.

- Participants must have completed the LR knowledge test and obtained a CBA learner logbook and guide book.

- The CBA guide book must have been read before starting the course.

- A person who holds a provisional P1 licence is not eligible for a LR licence.

- From 1 January 2015 ALL students undertaking nationally recognised training will need to have a Unique Student Identifier (USI). It is free and easy for students to create their own USI’s online.

Upgrading from a P2 Licence

Provisional P2 licence holders (who also hold a Class LR, MR or HR heavy vehicle licence) will remain a provisional licence holder until they have held the P2 licence for a minimum of 2 years and pass a Driver Qualification Test. There is no variation to this rule and an unrestricted licence will not be issued until the applicant complies with the requirements of the Graduated Licensing Scheme.

Assessment

This is a NSW RMS approved licence course. Drivers will be trained and assessed against the RMS competency standards by our RMS accredited assessors. After the required standard of competency has been achieved the RMS will issue the appropriate licence.

Requirements to Obtain a Light Rigid Licence

NEW SOUTH WALES

- Have held a class C licence, (except a learner licence) or equivalent for one year or more

- Pass a knowledge test (see this section on Knowledge tests).

- It is a requirement of the Roads and Maritime Services (RMS) of NSW, that prior to any HVCBA training & assessment commencing that you undertake a computer based Knowledge Test at an RMS office. Once you have passed this test you will be issued with the following:

- A Guide to Heavy Vehicle Competency Based Assessment

- The Guide outlines the requirements to pass the assessments as well as the tasks you need to perform to complete each criteria

- A Heavy Vehicle Competency Based Learner’s Log Book

- The log book is the official record of your progress.

- Pass an eyesight test.

- Either pass an RMS driving test or undertake HVCBA.

- The Computer Knowledge Test may be practiced anytime online at the RMS Website as a Standalone Test – Rigid Vehicle The Heavy Vehicle driver Handbook can be viewed and downloaded from the RMS Website
AUSTRALIAN CAPITAL TERRITORY

- An applicant for this licence class must have held an Australian driver licence (including a provisional licence) of a class C for a period of at least 12 months.

- Applicants are required to undertake and pass a knowledge assessment for this class of licence

- The knowledge assessment comprises 35 computer-based questions with some mandatory questions and some general questions.

- Applicants can answer up to four (4) questions incorrectly in the general questions group and still pass the assessment.

- Applicants are required to have passed the knowledge assessment before attempting a practical driving assessment for the class they are seeking.

- To undertake a knowledge assessment, applicants must have a current ACT licence and attend one of the following location

- Road Ready Centre 72 Townsend Street Phillip (02) 6282 8990

- Road Ready Centre Canberra Technology Park 47 Phillip Avenue Watson (02) 6162 5152

- A practical driving assessment is required for applicants wishing to obtain a driver licence for this class of licence (a driver licence will be issued appropriate to the class of vehicle in which the applicant passes his or her assessment):

- Display L Plates whilst being given instruction from an appropriately licensed driver
VICTORIA

- You can apply for a Light Rigid (LR) licence when you have held a car driver licence for 12 months. When you are learning to drive a truck or bus, you must always display DRIVER UNDER INSTRUCTION plates at the front and back of the vehicle.

- These plates must meet the following requirements:

- To get a heavy vehicle licence for the first time, you must produce your driver licence as evidence of identity and a secondary evidence document (e.g. a current Medicare Card, credit or account card issued by a bank, building society or credit union).

- An eyesight check where you will be required to read a standard eye chart

- A test of your road law knowledge based on information in the current edition of the Victorian bus and truck drivers’ handbook (note: if you already hold a bus or truck licence, a knowledge test is not necessary.)

- You must pass a driving test in a vehicle of the category of licence you require consisting of

- An on-road driving assessment

- An off-road skills assessment

- Once you have finished, you will be given a copy of your results.

- The assessment officer will also give you verbal feedback on your driving performance.

- If you pass your test with an accredited provider, you will be issued with a Vic Roads Certificate of Competence. You will need to take the certificate to your nearest Vic Roads Customer Service Centre to get your licence

Costing's

- 50% deposit is required upon booking. However the balance is to be paid before the course has been  completed (Unless alternate arrangements have been made).

- RMS Licence upgrade fees are not included.

- Any extra time will be charged at a rate of $150 per hour for Light Rigid, Medium Rigid, Heavy Rigid, Heavy Combination & for Multi Combination its $175 per hour, however most trainees complete their training and assessment.

Cancellation Policy

- 10% will be kept if a cancellation notice has not been received 48 hours before commencement of course date.

Other Information

                                                                               

We offer some of the best and affordable training the the region. Our trainers are all exciting and well rounded people making your training experience as good as it can be.

View our Courses

×
Intrain safety & Hire is a family owned equipment hire / training and safety equipment retailer business that is super proud to be able to provides a friendly, professional service with a huge range of specialist tools and equipment for hire or sale. We have experience and knowledge in the equipment hire industry which means you get the right advice to get your job done. Our wagga road Lavington store stocks an extensive range of new and up to date hire equipment for use by the home handyman, tradesman, builder, contractor and industry. For all your hire and safety needs please pop into the store or contact us on 02 6040 0807 ×
Intrain safety & Hire is a family owned equipment hire / training and safety equipment retailer business that is super proud to be able to provides a friendly, professional service with a huge range of specialist tools and equipment for hire or sale. We have experience and knowledge in the equipment hire industry which means you get the right advice to get your job done. Our wagga road Lavington store stocks an extensive range of new and up to date hire equipment for use by the home handyman, tradesman, builder, contractor and industry. For all your hire and safety needs please pop into the store or contact us on 02 6040 0807 ×
We have in-store a professional embroidery server. This is subcontracted out to project embroidery that has residence inside our wagga road office.

More about Project Embroidery

×